• Left hand squaring arm with tape measure inserts & 'T' slots
• High quality Sheffield blades
• Shadow line
• Hydraulic material clamps with optional neoprene pads
• Table top (Finger guard removed for photo)

• Rigid swing beam design [maxR]
• Inbuilt rigidity, no specialist foundations required [maxR]
• Top blade carrier pivots in self aligning heavy duty spherical roller bearings [maxR]
• Blade bolster adjustment. Enables blades to be easily aligned after sharpening (no shimming) [maxR]
• Will cut full range of material thicknesses up to machine's maximum capacity [maxR]
• Constant pressure hydraulic material clamping
• Manual blade gap adjustment, independent at each end of machine, calibrated for machine's material range
• Shadow line illuminated by fluorescent lights
• Left hand squaring arm and sheet support arms with tape measure inserts and 'T' slots for front stops
• Hydraulic operation with protection by relief valve
• External hydraulics for ease of maintenance
• Oil level and temperature indicator
• Roving foot pedal (with ability to stop the cutting stroke at any point and return)
• Throat for material slitting
• Heavy duty coil springs ensure positive and fast return (on 6mm x 3.7m & smaller machines)
• Full width table top (on 8mm & smaller machines)
• Manufacturer's quality system is certified to ISO9002

Highest quality blades

• Sheffield manufactured. Suitable for stainless steel
• Bottom blade 4 edge, top blade 2 edge

Safety

• Finger guard with recesses for accessibility
• Throat guard

Electrical configuration

• Star delta motor starter
• Standard 400v, 3 phase, neutral & earth, 50Hz AC power supply. Other by arrangement
• Electrical protection from overload
• Power isolation switch

Backup / Services

• All machines supplied with 1year warranty period
• Swiss-trained Cybelec service engineers
• Operation & service manuals

• Blade bolster adjustment
• Finger guard with recesses for accessibility

• Manual blade gap adjustment, independent on each end of machine, calibrated for the material range of the machine.

• External hydraulics for ease of access
• Oil level and temperature indicator
• Convenient filler and filter access

• Cybelec DNC 60 controller. Multiple step programs and multiple programs can be saved to memory
• High speed twin ball-screw back gauge supported on linear bearings. AC servomotor and belt drive
• Programmable cut length control
• Automatic blade gap adjustment set by controller according to material type and thickness
• RS 232 port

• Neoprene hold down pads on hydraulic clamps to protect material being cut
• Extended squaring arm
• Extended table arms
• Front disappearing stops (in T slot)
• Higher cutting speeds

Material handling

• Rear sheet support
• Rear sheet support conveyor

Safety

• Rear guard with interlock
• Light curtains

• Heavy duty coil springs ensure positive and fast return (on 6mm x 3700mm & smaller machines. All other machines use hydraulic return)
• Single lever or powered blade gap adjustment (optional)

• Step-less manually adjusted cut length control
• Powered adjustable cut length control (stepped)
• Powered adjustable cut length control (step-less)
• Manual lead-screw back gauge. Hand wheel operated with digital read-out counter
• Kohli CNC controller with cut counter, large buttons and twin lead-screw back gauge
• Kohli CNC controller with cut counter, large buttons and twin ball-screw back gauge
• Manual single lever blade gap adjustment for setting blade gap to suit material thickness
• Powered blade gap adjustment for setting blade gap to suit material thickness. Set via front panel

• Heavy duty spherical roller bearings on moving beam

• Front gauge
• Front feeder
• Down loading software